Multifun audio board "Cannot load image, XCore 0 is not en."

New to XMOS and XCore? Get started here.
Post Reply
danielone
Member
Posts: 11
Joined: Fri Nov 14, 2014 4:19 pm

Multifun audio board "Cannot load image, XCore 0 is not en."

Post by danielone »

Hi all,

Just received my Multifuncion Audio kit and I have a problem!

As soon as I received it I plugged in into my Mac and worked so I presume that it is pre-loaded with the USB Class 2.0 audio framework.

I opened the framework in xTime composer, I plug the 12V plug into the board and I connect it via the supplied xtag 2 adapter connected to the USB port. The adapter is correctly found in the IDE but as soon as I try to flash I get the error "Cannot load image, XCore 0 is not enabled".

Any possible solution?

Many thanks

Daniele


User avatar
sethu_jangala
XCore Expert
Posts: 589
Joined: Wed Feb 29, 2012 10:03 am

Post by sethu_jangala »

Have a look at the answer in the following Q&A section:

http://www.xcore.com/questions/1902/wha ... ot-enabled
danielone
Member
Posts: 11
Joined: Fri Nov 14, 2014 4:19 pm

Post by danielone »

Solved thanks.

I was compiling for the wrong target board.
Post Reply