For our project we like to have an option for usb mass storage, I would like to know if this is possible with the usb slicekit or if it is not possible with xcore, as I have not found anything about it on the forum. I did find more information about sd card storage, but I can't find a kit which supported sd card.
help in this area would be appreciated.
USB mass storage
-
sharpeye
- Member
- Posts: 8
- Joined: Fri Aug 01, 2014 11:56 am
-
Ross
- XCore Expert
- Posts: 966
- Joined: Thu Dec 10, 2009 9:20 pm
- Location: Bristol, UK
Is it host or device functionality you are looking for?
-
sharpeye
- Member
- Posts: 8
- Joined: Fri Aug 01, 2014 11:56 am
the xcore devices needs to access(read/write to) an usb mass storage unit. this while uses the Audio usb 2.0 program
-
Ross
- XCore Expert
- Posts: 966
- Joined: Thu Dec 10, 2009 9:20 pm
- Location: Bristol, UK
Sounds like you are after simultaneous host and device operation - this is going to need 2 x U series devices (or a dual tile U series with an extra external phy maybe)
The host code is also currently full-speed only.
The host code is also currently full-speed only.