Hey guys,
when I connect two XK-AVB-LC-SYS boards directly, my application works. When I connect them via a dumb unmanaged switch, the application works too. But when I connect them over a managed switch, there isn't any successful connection. But why? I have already searched any useful setting in the webbrowser of the switches, but nothing found.
Greetz
Chris
[XK-AVB-LC-SYS] no connection over intelligent switches Topic is solved
-
- Member++
- Posts: 16
- Joined: Mon Nov 14, 2016 7:03 pm
-
- Experienced Member
- Posts: 66
- Joined: Fri Feb 05, 2010 12:34 pm
Hi Chris
The switch has to support AVB.
This presentation illustrates why and which protocols the Switch must support:
https://standards.ieee.org/events/autom ... et_AVB.pdf
See https://www.xmos.com/download/private/A ... 1.2%29.pdf
for available switches.
We can also recommend http://motu.com/products/avb/avb-switch
Regards, /T
The switch has to support AVB.
This presentation illustrates why and which protocols the Switch must support:
https://standards.ieee.org/events/autom ... et_AVB.pdf
See https://www.xmos.com/download/private/A ... 1.2%29.pdf
for available switches.
We can also recommend http://motu.com/products/avb/avb-switch
Regards, /T
-
- Member++
- Posts: 16
- Joined: Mon Nov 14, 2016 7:03 pm
Thanks Thomas!
1)
Has someone already worked with the S-9150T AVB-Switch of S2Connect?
http://www.s2konnect.com/de/produkte/pr ... -9150T.php
2)
Does the MOTU AVB Switch have any configuration possibilities? Because at it's website I only read something about Plug&Play and the device does everything automatically.
1)
Has someone already worked with the S-9150T AVB-Switch of S2Connect?
http://www.s2konnect.com/de/produkte/pr ... -9150T.php
2)
Does the MOTU AVB Switch have any configuration possibilities? Because at it's website I only read something about Plug&Play and the device does everything automatically.