Search found 16 matches

by revenac
Wed Sep 27, 2017 9:42 am
Forum: General Questions
Topic: USB Audio 2.0 Stereo Driver for Windows 10 Update
Replies: 11
Views: 83820

Re: USB Audio 2.0 Stereo Driver for Windows 10 Update

solved the matter. When the driver is loaded into the Windows 7 based PC (in general for any Win 8 or earlier based PC), it is associated to a specific physical USB port AND ONLY THAT USB PORT. To simplify: the driver it is not installed into the Win 7 PC only but on a specific USB port of the Win 7...
by revenac
Mon Sep 25, 2017 10:11 am
Forum: General Questions
Topic: USB Audio 2.0 Stereo Driver for Windows 10 Update
Replies: 11
Views: 83820

Re: USB Audio 2.0 Stereo Driver for Windows 10 Update

Hello, I followed all the instructions, suggestions and information found about the "how to install the XMOS driver". The USB interface designed works perfectly with the driver supplied by MQA Ltd., of course I specify the PID and VID of MQA Ltd. Everything is fine, works well on Windows 1...
by revenac
Mon Sep 04, 2017 3:08 pm
Forum: General Questions
Topic: USB Audio 2.0 Stereo Driver for Windows 10 Update
Replies: 11
Views: 83820

Re: USB Audio 2.0 Stereo Driver for Windows 10 Update

thank you for the explanation. I haven't used the XMOS IDs for both the VID & PID because I don't know if I can. What are the XMOS IDs? At the moment I am using the VID & PID of the third party is supplying its dev kit. I would like to use mine. But this is not important. I have only to use ...
by revenac
Fri Sep 01, 2017 7:06 am
Forum: General Questions
Topic: USB Audio 2.0 Stereo Driver for Windows 10 Update
Replies: 11
Views: 83820

Re: USB Audio 2.0 Stereo Driver for Windows 10 Update

"You will have to get the INF file signed with the IDs you have applied"

can you explain better?
by revenac
Thu Aug 31, 2017 4:05 pm
Forum: General Questions
Topic: USB Audio 2.0 Stereo Driver for Windows 10 Update
Replies: 11
Views: 83820

Re: USB Audio 2.0 Stereo Driver for Windows 10 Update

Hello, I am not a Windows expert. On the other hands I found a folder where the driver from the Dev Kit supplier was saved. Inside it there is a vendor.cer and a setup.bmp. After I have received the driver from XMOS with my PID, what have I to do? Where can I find the vendor.cer and the setup.bmp fr...
by revenac
Wed Aug 30, 2017 9:19 am
Forum: General Questions
Topic: USB Audio 2.0 Stereo Driver for Windows 10 Update
Replies: 11
Views: 83820

Re: USB Audio 2.0 Stereo Driver for Windows 10 Update

I uninstalled the driver of the third party before to install the driver with my PID.

The behaviour is exactly the same with the 3.34 driver too.
And 3.34 is the release of the driver of the third party too.
by revenac
Wed Aug 30, 2017 9:12 am
Forum: General Questions
Topic: USB Audio 2.0 Stereo Driver for Windows 10 Update
Replies: 11
Views: 83820

USB Audio 2.0 Stereo Driver for Windows 10 Update

Hello, I have designed a board around the XU216-512-TQ128 chip. I started from a Dev Kit suppplied by a third party and with the kit I received also the Driver for Windows. The firmware with the Dev Kit reports: #define VENDOR_STR "xxx" #define PRODUCT_STR_A1 "yyyyyyyyy" #define ...
by revenac
Wed Apr 12, 2017 9:58 am
Forum: General Questions
Topic: again "Cannot load image, XCore 0 is not enabled"
Replies: 16
Views: 29479

Re: again "Cannot load image, XCore 0 is not enabled"

I have ordered all the chips ex/novo. I will receive immediately after Eastern. And I will populate again the existing board. On the other hands I have updated the board and I abandon the NCP301 towards the ADM1085. xCORE200 is the schematic I was inspired to. With the ADM1085 I have more flexibilit...
by revenac
Tue Apr 11, 2017 8:27 pm
Forum: General Questions
Topic: again "Cannot load image, XCore 0 is not enabled"
Replies: 16
Views: 29479

Re: again "Cannot load image, XCore 0 is not enabled"

believe me or not believe me I have in hands another board with the RST an Power schematic I posted. Exactly the same, with the 100nF debouce cap in that "wrong" position. And it starts up, I can flash, and everything is OK. Unfortunately for me that board was made by an external consultan...
by revenac
Tue Apr 11, 2017 7:56 pm
Forum: General Questions
Topic: again "Cannot load image, XCore 0 is not enabled"
Replies: 16
Views: 29479

Re: again "Cannot load image, XCore 0 is not enabled"

nothing change. 100nF removed.
kept the RST button pressed, powered on, and released. nothing change.
always and only "xrun: Cannot load image, XCore 0 is not enabled"

tomorrow I start with a stupid application, on and off a LED only.