Hi Ross

I will look into it, but it should be ok *hope*

MB

I just want to say sorry, I found the bug and it was a HW fault. My connection beween XMOS board and audio board is not correct. The audio board has a faulty connection to Gnd on the MCLK_Select line, so the clock switch was working only when the audio board was not connected and I checked the clock...

OK I have switched to 6.2.1 and Studio 13.0.2 but the result is the same, even if I configure it as stereo device. These are my changes. But if it is working fine with your HW, I think there is something wrong with mine. But I think it should be quite the same... customdefines.h /** * @file customde...

Thanks for your answer.

First I will switch to 6.2.1 (I didn't notice, that there is a new version) and give it a try.

I looked into your header file and it lookes more or less like mine.

So I will inform you after my try...

MB

Sorry missed that question...

8x out, no inputs.

Yes, they still exist exactly as you posted...

Hi Ross

As I mentioned before, I use 6.1.0 from XMOS and I only changed from 4xIn and 4xOut to 8xOut. The rest is like in Usb Audio DJ example...

Maybe interesting: I use PCM5102 as DACs.

Thanks for help!

MB

Hi there I got my audio board for my custom Xmos Usb audio design ( http://www.xcore.com/forum/viewtopic.php?f=21&t=2355 ) and I have a little problem. If I use 44100, 88200, .. kHz sample rate everything works fine, but if I switch to 48000, 9600, ... kHz the sound is playling too slow. I have ...

I have JTag only connection (M.2) and no pull downs on this pins.

TADDDAAA

Richard, that was the solution! No wI can debug my board as expected...

Great job guys and many many thanks!!!

MB