Search found 78 matches
- Fri Aug 31, 2018 9:09 am
- Forum: Other Applications
- Topic: Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct SQI p
- Replies: 4
- Views: 10432
Re: Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct S
Ahhh. Got it. Might be cheaper to just order a flash from the list I guess. I really think that this list should have been in the Chip documentation. Thanks for the info I would have never searched in the Xtime manual. While I do see the example for coding a new flash...Do you mind pointing me to wh...
- Thu Aug 30, 2018 1:38 pm
- Forum: Other Applications
- Topic: Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct SQI p
- Replies: 4
- Views: 10432
Re: Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct S
SST26VF016-80-5I-S2AE FLASH MEMORY, 16MBIT, 80MHZ, SOIC-8 85423275 Manufacturer code - SST26VF016-80-5I-S2AE -- -Bought from Farnell is the flash that i am using.
- Thu Aug 30, 2018 1:37 pm
- Forum: Other Applications
- Topic: Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct SQI p
- Replies: 4
- Views: 10432
Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct SQI p
Having a discussion on this at another post, but decided to make this into a separate topic. I made a custom PCB and I am getting this when i try to flash the original multichannel board USB application
- Thu Aug 30, 2018 12:52 pm
- Forum: Other Applications
- Topic: xrun: Cannot load image, XCore 0 is not enabled
- Replies: 14
- Views: 13979
Re: xrun: Cannot load image, XCore 0 is not enabled
I used an osciloscope to monitor what happens to the pins during flash and a spike is always present when it tries to flash so connection is out of the way i guesss
- Thu Aug 30, 2018 9:59 am
- Forum: Other Applications
- Topic: xrun: Cannot load image, XCore 0 is not enabled
- Replies: 14
- Views: 13979
Re: xrun: Cannot load image, XCore 0 is not enabled
SST26VF016-80-5I-S2AE FLASH MEMORY, 16MBIT, 80MHZ, SOIC-8 85423275 Manufacturer code - SST26VF016-80-5I-S2AE -- -Bought from Farnell
- Thu Aug 30, 2018 9:05 am
- Forum: Other Applications
- Topic: xrun: Cannot load image, XCore 0 is not enabled
- Replies: 14
- Views: 13979
Re: xrun: Cannot load image, XCore 0 is not enabled
New fresh error - Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct SQI ports are defined within your xn file. Looking into it i did find similar posts and I am using the default codes, but I don't know how to proceed with adapting to ...
- Thu Aug 30, 2018 9:02 am
- Forum: Other Applications
- Topic: xrun: Cannot load image, XCore 0 is not enabled
- Replies: 14
- Views: 13979
Re: xrun: Cannot load image, XCore 0 is not enabled
I am using usb in and 2 spdif ins. And while i can power it with USB i am using just 2 poles and an external power supply for the 5V
- Thu Aug 30, 2018 9:00 am
- Forum: Other Applications
- Topic: xrun: Cannot load image, XCore 0 is not enabled
- Replies: 14
- Views: 13979
Re: xrun: Cannot load image, XCore 0 is not enabled
Great answers. Thanks guys. I fixed the cap and the resistor (ohm cuz didnt have 4.7) The oscillator is pre-programmed to output 24 and 49.152 and i have already tested it without the XMOS, but i did ground it because that manual said so, but i will follow your advice now . I also grounded the PLL p...
- Wed Aug 29, 2018 2:11 pm
- Forum: Other Applications
- Topic: xrun: Cannot load image, XCore 0 is not enabled
- Replies: 14
- Views: 13979
Re: xrun: Cannot load image, XCore 0 is not enabled
Yes I switched it for a 4.7K referencing the original design - still No
- Wed Aug 29, 2018 1:50 pm
- Forum: Other Applications
- Topic: xrun: Cannot load image, XCore 0 is not enabled
- Replies: 14
- Views: 13979
Re: xrun: Cannot load image, XCore 0 is not enabled
I also spotted that i hadnt grounded the pll GND, SO i did that with a thin wire and checked checked against shorts