Hello from Portland, Oregon!

First time on the site? Say hello here!
Post Reply
User avatar
Freykin
New User
Posts: 3
Joined: Fri Feb 26, 2016 11:39 pm
Contact:

Hello from Portland, Oregon!

Post by Freykin »

I'm Christopher Street, a programmer for Echo Digital Audio. I've recently been learning how to code in xc for one of our products, along with learning some assembly, so figured it was time I made an account on somewhere like here. I've been working with the XS1-L8 and the XE216-512-TQ128 chips so far.


User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm
Contact:

Post by Folknology »

Welcome Christopher, I don't know much about audio specifically but there are plenty of folks down here who do! I do however have some experience with more general XC stuff like others here.
User avatar
Ross
XCore Expert
Posts: 962
Joined: Thu Dec 10, 2009 9:20 pm
Location: Bristol, UK

Post by Ross »

Welcome :)
Andy Syltebo
Newbie
Posts: 1
Joined: Wed Feb 14, 2018 9:48 pm

Post by Andy Syltebo »

Greetings Christopher!
Hi Folknology and Ross too!

I'm Andy from Bellingham, WA so not too far from ya. I'm new to this as well but share the same xe216-512 platform. I'm developing a DAC using XMOS for signal conversion, DSP, and I2C dac control using a Cirrus CS4398. I have the xCORE-200 Dev board. So far so good...

It'll be a stand alone unit for listening enjoyment. Input: coax and optical SPDIF and usb. Output: Single ended RCA.
Op Amp output stage so far, but hybrid/tube is an interesting idea...
I've put a lot of consideration into power supply...

I build speakers and amps too so if anyone is interested in more audio conversations, hit me up...

Best,
Andy
Post Reply