XHRA-2HPA USB_VBUS Pin for External Power Solutions

First time on the site? Say hello here!
Post Reply
DHembree
Experienced Member
Posts: 75
Joined: Fri Apr 15, 2016 6:46 pm

XHRA-2HPA USB_VBUS Pin for External Power Solutions

Post by DHembree »

First post here. I am very new to this device. there does not seem to be a wealth of information in the data sheet regarding this, so I thought I would ask here. My system is to be powered from an external source - not USB powered. It is unclear what must be done with the USB_VBUS pin in this situation.

Thanks in advance,
Dan


henk
Respected Member
Posts: 347
Joined: Wed Jan 27, 2016 5:21 pm

Post by henk »

Hi Dan,

Welcome!

Connect USB_VBUS to the VBUS pin of your USB connector; then the device can see when it is plugged in.

Have a look at the example application diagram in the data sheet.

Cheers,
Henk
Post Reply