A little overwhelmed....
Posted: Tue Nov 29, 2016 5:52 am
I'm a software guy, looking to prototype an array microphone system. This sure looks like a promising place and product to start, but I'm hoping someone can point me in a good direction for prototyping with a path to productizing. Here's my basic requirements:
* 32 channels / microphones, eventually 64 in the product
* very lightweight in the product, don't care for prototyping
* sample rate of 11kHz or better for each microphone
* coherent clock across all microphones, i.e. ideally corresponding samples will be taken at the same time for each microphone
* in a perfect world, dynamically tunable sample rate, to include non-standard rates
* access to each sample by source for custom DSP / beamforming application
* Windows or Linux prototyping / development, with USB interface ideally
Can someone let me know if one of the products here is what I'm looking for, and the best way to get started on this project?
Many thanks...
* 32 channels / microphones, eventually 64 in the product
* very lightweight in the product, don't care for prototyping
* sample rate of 11kHz or better for each microphone
* coherent clock across all microphones, i.e. ideally corresponding samples will be taken at the same time for each microphone
* in a perfect world, dynamically tunable sample rate, to include non-standard rates
* access to each sample by source for custom DSP / beamforming application
* Windows or Linux prototyping / development, with USB interface ideally
Can someone let me know if one of the products here is what I'm looking for, and the best way to get started on this project?
Many thanks...