Hi,
Thank you. I will go through it and contact them too ..
I already tried using Drivers of some existing USB to Ethernet Converter devices. I captured their Device Descriptors and try to implement the same to test.
However i got stuck with the EndPoint Size. Device Driver says EP of size 512 bytes. If i define the same in my stack, my enumeration gets stuck after SetConfiguration command. I tried to define EP Size as 64 in my Stack. Device gets enumerated. I am able to send Data on Interrupt EP. However, Read EP does not work..
My Controller says it has 4K RAM for USB End Points.
sc_usb and driver for different OS
-
- New User
- Posts: 2
- Joined: Thu Aug 09, 2018 7:32 am