5x5x5 LED cube
Posted: Sun Mar 28, 2010 12:31 am
Version: 1
Status: Complete
License: MIT
Download: /files/project_builds/LEDcube.zip
This is a small project I made in a few days during my Christmas vacation.
It's a 5x5x5 LED cube driven by two STP16CP05 LED drivers and controlled by an XK-1 board.
The LED cube consists of 125 LEDs organized in five layers with 25 LEDs in each layer.
Each of the 25 LEDs in each layer are controlled individually and the layers are time multiplexed.
The software consists of a LED controller and a "command set" used to easily create animations.
My initial plan was to implement PWM controlled LEDs to be able to have different intensity on each LED but I soon realized that my stripboard design could not handle the signal frequency required.
More information and a build log and can be found here.
Watch the video!
Video:
Images:
Status: Complete
License: MIT
Download: /files/project_builds/LEDcube.zip
This is a small project I made in a few days during my Christmas vacation.
It's a 5x5x5 LED cube driven by two STP16CP05 LED drivers and controlled by an XK-1 board.
The LED cube consists of 125 LEDs organized in five layers with 25 LEDs in each layer.
Each of the 25 LEDs in each layer are controlled individually and the layers are time multiplexed.
The software consists of a LED controller and a "command set" used to easily create animations.
My initial plan was to implement PWM controlled LEDs to be able to have different intensity on each LED but I soon realized that my stripboard design could not handle the signal frequency required.
More information and a build log and can be found here.
Watch the video!
Video:
Images: