Version: 1
Status: Under development
License: BSD
How can I use a 4bit port for the data out for an I2S master Tx, the Bclk, LRClk and Mclk are on single ports. I have run out of single bit ports and this seems to be the logical choice. I thought this would be the default for the TX data lines.
I2S TX data on 4bit port
-
- Newbie
- Posts: 1
- Joined: Fri Nov 18, 2016 8:17 pm
-
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am