Target list show: xmos xtag-2 connected to none [A8a0Lpvs]

Technical questions regarding the XTC tools and programming with XMOS.
Post Reply
oayzw
Member
Posts: 11
Joined: Fri Feb 24, 2017 8:30 am

Target list show: xmos xtag-2 connected to none [A8a0Lpvs]

Post by oayzw »

Target list show "xmos xtag-2 connected to in use [A8a0Lpvs] " , a few seconds later ,Target list show: xmos xtag-2 connected to none [A8a0Lpvs], When i config debug options in project properties.

And later, message box show "Target connection failed" when i debug the program.
Image

i use the xCore-200-explorerkit

thank you very much.


User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Post by mon2 »

Which operating system ?

Was this kit supplied with the XTAG-2 tool ?

Are you using the most current xTimeComposer tool ?

Have you tested other USB ports on your box ? If using an USB hub, bypass the hub and go directly to the upstream port (although the motherboard itself may be based on an internal USB hub controller).

See here about issues with some motherboards:

http://www.xcore.com/viewtopic.php?t=3964

Try this idea (if on Windows) -> reboot -> post your feedback on the testing.
oayzw
Member
Posts: 11
Joined: Fri Feb 24, 2017 8:30 am

Post by oayzw »

Got it exactly.

add a system environment variable XMOS_XTAG_WINDOWS7_STARTUP_TIME with the value 500

Thank you very much.
Post Reply