8 sounds usb Rev3 flashing firmware xe Topic is solved

Technical questions regarding the XTC tools and programming with XMOS.
doumdi
Member++
Posts: 18
Joined: Thu Mar 24, 2011 6:18 pm
Contact:

Post by doumdi »

You need to specify the spec file if you are using a AT25SF041-SSHD device, they are not supported by default by xflash. Go to Flash Configuration and XFlash Options then select SPI Spec File. Use the following file :

https://sourceforge.net/projects/eights ... c/download

Keep me informed of your progress.

Dominic


View Solution
ibocakir06
Member
Posts: 8
Joined: Wed Mar 01, 2017 11:25 pm

Post by ibocakir06 »

doumdi wrote:You need to specify the spec file if you are using a AT25SF041-SSHD device, they are not supported by default by xflash. Go to Flash Configuration and XFlash Options then select SPI Spec File. Use the following file :

https://sourceforge.net/projects/eights ... c/download

Keep me informed of your progress.

Dominic
Hello dominic, really thanks to you, finally I can flash the board and GEN LED blinks with the file you sent :)

But when I come back to my real problem, I want to flash 8soundsUSB.xe file, I got the following error again:

XN11192 Incomplete network configuration (no direction specified for link "4" on node "0")

Do you have any idea about this problem ?
doumdi
Member++
Posts: 18
Joined: Thu Mar 24, 2011 6:18 pm
Contact:

Post by doumdi »

doumdi
Member++
Posts: 18
Joined: Thu Mar 24, 2011 6:18 pm
Contact:

Post by doumdi »

You might also want to build the firmware yourself : https://sourceforge.net/p/eightsoundsusb/wiki/Firmware/

Tell me if the procedure is working.

Dominic
ibocakir06
Member
Posts: 8
Joined: Wed Mar 01, 2017 11:25 pm

Post by ibocakir06 »

doumdi wrote:You might also want to build the firmware yourself : https://sourceforge.net/p/eightsoundsusb/wiki/Firmware/

Tell me if the procedure is working.

Dominic
Hi Dominic, Really really thanks to you, finally I could flash the board.

With my best regards,

İbrahim
doumdi
Member++
Posts: 18
Joined: Thu Mar 24, 2011 6:18 pm
Contact:

Post by doumdi »

Ibrahim, you are welcome. Does it work adequately? Also, did you build the board yourself?

Best regards,

Dominic
ibocakir06
Member
Posts: 8
Joined: Wed Mar 01, 2017 11:25 pm

Post by ibocakir06 »

I was very interested in your project, after some reviews, I made the PCB's produce, then I bought the components and solder them. But I couldn't flash it.

Now with your help, I completed the harware :)
ibocakir06
Member
Posts: 8
Joined: Wed Mar 01, 2017 11:25 pm

Post by ibocakir06 »

Hi Dominic, I am back.

After flashing the board, my computer didnt see it. So I cant update the driver.

By the way, my board is rev 3.0 but you sent me 3.0.2 firmware. Can this be a problem ?

In addition, I measured the RESETB voltage. It is 3.3V and this means USB3318 is not in ResetMode.
doumdi
Member++
Posts: 18
Joined: Thu Mar 24, 2011 6:18 pm
Contact:

Post by doumdi »

ibocakir06 wrote:Hi Dominic, I am back.
After flashing the board, my computer didnt see it. So I cant update the driver.
By the way, my board is rev 3.0 but you sent me 3.0.2 firmware. Can this be a problem ?
No we only changed parts for the 1V8 and 1V0 regulators. That should not have any impact on the firmware.
ibocakir06 wrote: In addition, I measured the RESETB voltage. It is 3.3V and this means USB3318 is not in ResetMode
I would suggest that you verify U13 (USB3318) :

1) Check if your REFCLK = 13MHz on PIN23
2) Check if 1V8 is present on PIN21
4) Check if 3V3 is present on PIN3, 4, 17
5) Check if CLKOUT = 60MHz
6) Check if you have USB diff signals on PIN 5,6
7) Check if you have something from the XMOS chip on pins DATAX , STP, NXT, DIR, RESET

I would suggest that we continue this discussion on our forum :

https://sourceforge.net/p/eightsoundsus ... rce=navbar

You might be interested to read this :

https://sourceforge.net/p/eightsoundsus ... /06a22a23/

Your problem might be related to bad soldering of your XMOS CPU.

Best regards,

Dominic
ibocakir06
Member
Posts: 8
Joined: Wed Mar 01, 2017 11:25 pm

Post by ibocakir06 »

Thank you Dominic for your great cooperation. I wrote my sutiation on your forum.

If someone else wants to read the continue of the discussion : https://sourceforge.net/p/eightsoundsus ... /06a22a23/
Post Reply