You need to specify the spec file if you are using a AT25SF041-SSHD device, they are not supported by default by xflash. Go to Flash Configuration and XFlash Options then select SPI Spec File. Use the following file :
https://sourceforge.net/projects/eights ... c/download
Keep me informed of your progress.
Dominic
8 sounds usb Rev3 flashing firmware xe Topic is solved
-
- Member
- Posts: 8
- Joined: Wed Mar 01, 2017 11:25 pm
Hello dominic, really thanks to you, finally I can flash the board and GEN LED blinks with the file you sent :)doumdi wrote:You need to specify the spec file if you are using a AT25SF041-SSHD device, they are not supported by default by xflash. Go to Flash Configuration and XFlash Options then select SPI Spec File. Use the following file :
https://sourceforge.net/projects/eights ... c/download
Keep me informed of your progress.
Dominic
But when I come back to my real problem, I want to flash 8soundsUSB.xe file, I got the following error again:
XN11192 Incomplete network configuration (no direction specified for link "4" on node "0")
Do you have any idea about this problem ?
Can you try this firmware : https://sourceforge.net/projects/eights ... e/download
You might also want to build the firmware yourself : https://sourceforge.net/p/eightsoundsusb/wiki/Firmware/
Tell me if the procedure is working.
Dominic
Tell me if the procedure is working.
Dominic
-
- Member
- Posts: 8
- Joined: Wed Mar 01, 2017 11:25 pm
Hi Dominic, Really really thanks to you, finally I could flash the board.doumdi wrote:You might also want to build the firmware yourself : https://sourceforge.net/p/eightsoundsusb/wiki/Firmware/
Tell me if the procedure is working.
Dominic
With my best regards,
İbrahim
Ibrahim, you are welcome. Does it work adequately? Also, did you build the board yourself?
Best regards,
Dominic
Best regards,
Dominic
-
- Member
- Posts: 8
- Joined: Wed Mar 01, 2017 11:25 pm
I was very interested in your project, after some reviews, I made the PCB's produce, then I bought the components and solder them. But I couldn't flash it.
Now with your help, I completed the harware :)
Now with your help, I completed the harware :)
-
- Member
- Posts: 8
- Joined: Wed Mar 01, 2017 11:25 pm
Hi Dominic, I am back.
After flashing the board, my computer didnt see it. So I cant update the driver.
By the way, my board is rev 3.0 but you sent me 3.0.2 firmware. Can this be a problem ?
In addition, I measured the RESETB voltage. It is 3.3V and this means USB3318 is not in ResetMode.
After flashing the board, my computer didnt see it. So I cant update the driver.
By the way, my board is rev 3.0 but you sent me 3.0.2 firmware. Can this be a problem ?
In addition, I measured the RESETB voltage. It is 3.3V and this means USB3318 is not in ResetMode.
No we only changed parts for the 1V8 and 1V0 regulators. That should not have any impact on the firmware.ibocakir06 wrote:Hi Dominic, I am back.
After flashing the board, my computer didnt see it. So I cant update the driver.
By the way, my board is rev 3.0 but you sent me 3.0.2 firmware. Can this be a problem ?
I would suggest that you verify U13 (USB3318) :ibocakir06 wrote: In addition, I measured the RESETB voltage. It is 3.3V and this means USB3318 is not in ResetMode
1) Check if your REFCLK = 13MHz on PIN23
2) Check if 1V8 is present on PIN21
4) Check if 3V3 is present on PIN3, 4, 17
5) Check if CLKOUT = 60MHz
6) Check if you have USB diff signals on PIN 5,6
7) Check if you have something from the XMOS chip on pins DATAX , STP, NXT, DIR, RESET
I would suggest that we continue this discussion on our forum :
https://sourceforge.net/p/eightsoundsus ... rce=navbar
You might be interested to read this :
https://sourceforge.net/p/eightsoundsus ... /06a22a23/
Your problem might be related to bad soldering of your XMOS CPU.
Best regards,
Dominic
-
- Member
- Posts: 8
- Joined: Wed Mar 01, 2017 11:25 pm
Thank you Dominic for your great cooperation. I wrote my sutiation on your forum.
If someone else wants to read the continue of the discussion : https://sourceforge.net/p/eightsoundsus ... /06a22a23/
If someone else wants to read the continue of the discussion : https://sourceforge.net/p/eightsoundsus ... /06a22a23/