Has anybody tried the new xcore -200 slicekit? XK-SK-X200-ST
Is it easy to get up and running in composer 14.3?
Does it work with the old slice cards?
Is there any example code available for it?
Any help would be greatly appreciated!
xcore-200 Slicekit XK-SK-X200-ST
-
- Active Member
- Posts: 37
- Joined: Sat Mar 18, 2017 7:19 pm
-
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am
Not sure how much you trust this (coming from an XMOS insider..) but my 2c/2p is:
Yes. And it works very well. SDRAM slice actually works on this one (signal integrity much better)Has anybody tried the new xcore -200 slicekit? XK-SK-X200-ST
Yes. It's very similar to previous ones although the xlink for xscope debug has moved. Here's an early xn file for it...Is it easy to get up and running in composer 14.3?
YesDoes it work with the old slice cards?
Not specifically - but then again it's just a glorified breakout board so the examples would be related more to the slices than the core board itselfIs there any example code available for it?
You do not have the required permissions to view the files attached to this post.
-
- Active Member
- Posts: 48
- Joined: Mon Oct 19, 2015 2:12 pm
The XN file for this board is included in 14.3 by default but needs adding manually to previous 14.x tools versions. Take a look at the HW manual for more info:
https://www.xmos.com/download/private/x ... 1.0%29.pdf
For example code, we use the USB HID demo AN00129 and the gigabit ethernet demo AN00199 as part of the manufacturing test flow for the kit, you could have a play with these.
Thanks,
Matthew.
https://www.xmos.com/download/private/x ... 1.0%29.pdf
For example code, we use the USB HID demo AN00129 and the gigabit ethernet demo AN00199 as part of the manufacturing test flow for the kit, you could have a play with these.
Thanks,
Matthew.
-
- XCore Expert
- Posts: 578
- Joined: Thu Nov 26, 2015 11:47 pm
When will the xCORE 200 be back in stock in Digikey? Digikey is saying 11/1/2018, is that accurate?