dfu
-
- Member++
- Posts: 20
- Joined: Thu Oct 19, 2017 1:44 pm
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
-
- Member++
- Posts: 20
- Joined: Thu Oct 19, 2017 1:44 pm
hey,guy
What is the reason for this?
C:\Program Files\Thesycon\TUSBAudio_Driver>dfucons.exe
Missing command. For help, use dfucons -h.
What is the reason for this?
C:\Program Files\Thesycon\TUSBAudio_Driver>dfucons.exe
Missing command. For help, use dfucons -h.
-
- Member++
- Posts: 20
- Joined: Thu Oct 19, 2017 1:44 pm
Another question.I already have the following drivers: XMOS xtag-3 and XMOS Microphone Array Control why thesycon shows that I have no connection driver?
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
You need to run the dfucons.exe from the command prompt (dosshell).
Try:
Here is what we see after installing this download:
http://www.xcore.com/viewtopic.php?t=5570&start=20
As the message states, you have not supplied a command :)What is the reason for this?
C:\Program Files\Thesycon\TUSBAudio_Driver>dfucons.exe
Missing command. For help, use dfucons -h.
Try:
The is the CLI interface = Command Line Interface so you will need to pass some parameters after the dfuconsdfucons -h <ENTER>
Here is what we see after installing this download:
http://www.xcore.com/viewtopic.php?t=5570&start=20
-
- Member++
- Posts: 20
- Joined: Thu Oct 19, 2017 1:44 pm
Thank you for your reply. I hope you will continue to help me.
I used the command "dfucons info",but it turns out that No devices available.
My device manager has two devices for xmos.they are xmos xtag-3 and xmos microphone array control.Why can't they be scanned?
I used the command "dfucons info",but it turns out that No devices available.
My device manager has two devices for xmos.they are xmos xtag-3 and xmos microphone array control.Why can't they be scanned?