Program directly via USB without using JTAG

Technical questions regarding the XTC tools and programming with XMOS.
Post Reply
Engineer1983
New User
Posts: 2
Joined: Thu Feb 01, 2018 6:20 am

Program directly via USB without using JTAG

Post by Engineer1983 »

Hello,
I'm wondering whether there is a way of setting up the USB functionality of the XCORE and then downloading the xe file directly via USB port. I've been looking through the forum but cannot find anything. Has anyone tried it?
I'm currently working on xCORE -200 MC AUDIO PCB. Any links would be also greatly appreciated.
Thanks!


User avatar
johned
XCore Addict
Posts: 185
Joined: Tue Mar 26, 2013 12:10 pm
Contact:

Post by johned »

For USB Audio we support DFU. Please see the USB Audio Design Guide for further details : https://www.xmos.com/published/usb-audi ... ion=latest. This requires that the device is already programmed with a DFU enabled image.
Best regards,
John
Engineer1983
New User
Posts: 2
Joined: Thu Feb 01, 2018 6:20 am

Post by Engineer1983 »

Thanks John. I'll try and load some DFU code onto the chip and see if I can get it enabled.
Post Reply