I started to evaluate xflash command line utility and when entered ./xflash -l on Ubuntu 16.04 LTS I got the following response:
xrun: Unable to access XMOS tools, environment not setup correctly
Failed to run list-devices command
Failed to run list-devices command
I presume that executing ./SetEnv is needed, but that doesn't resolve the problem. If just ./xflash is entered I got the following error:
Error: F03084 Device list discover failed.
Error: F03084 Device list discover failed.
xrun: Unable to access XMOS tools, environment not setup correctly Topic is solved
-
- Active Member
- Posts: 60
- Joined: Mon Oct 23, 2017 1:49 pm
- Location: Croatia
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
-
- Active Member
- Posts: 60
- Joined: Mon Oct 23, 2017 1:49 pm
- Location: Croatia
Not likely, I had established communication with xTAG and can e.g. upload program code into MCU memory.
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
-
- Active Member
- Posts: 60
- Joined: Mon Oct 23, 2017 1:49 pm
- Location: Croatia
:) Yes, that is a known and still not fixed issue. One should fix that to see anything on the xTIMEcomposer on linux (not just Ubuntu), what I already fixed. But here I have a problem with a command line.
Anyway, any idea about that Error: F03084 Device list discover failed. ?
Anyway, any idea about that Error: F03084 Device list discover failed. ?
-
- Active Member
- Posts: 60
- Joined: Mon Oct 23, 2017 1:49 pm
- Location: Croatia
Oops, I find a problem: instead of ./SetEnv one have to enter source SetEnv. Case closed.
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
Great. Yes, galmonte noted the same in step 2 in the above url.