I started with file XLF208-128-TQ64-C10 shipped with xTimeComposer tools. Since the XLF208 part has embedded flash, I was expecting to see sections that looked something like
Code: Select all
<Boot>
<Source Location="bootFlash"/>
</Boot>
<Tile Number="0" Reference="tile[0]">
<Port Location="XS1_PORT_1B" Name="PORT_SQI_CS"/>
<Port Location="XS1_PORT_1C" Name="PORT_SQI_SCLK"/>
<Port Location="XS1_PORT_4B" Name="PORT_SQI_SIO"/>
</Tile>
Code: Select all
<ExternalDevices>
<Device NodeId="0" Tile="0" Class="SQIFlash" Name="bootFlash" Type="S25FL116K">
<Attribute Name="PORT_SQI_CS" Value="PORT_SQI_CS"/>
<Attribute Name="PORT_SQI_SCLK" Value="PORT_SQI_SCLK"/>
<Attribute Name="PORT_SQI_SIO" Value="PORT_SQI_SIO"/>
<Attribute Name="QE_REGISTER" Value="quad_spi_qe_location_status_reg_0"/>
<Attribute Name="QE_BIT" Value="quad_spi_qe_bit_6"/>
</Device>
</ExternalDevices>
Thanks,
Andrew