Xmos Microphone array + PIC32MZ
Posted: Fri Feb 17, 2017 9:52 am
I have a PIC32MZ2048EFH144 (10 Bit ADC) Microcontroller that has a USB Host Port (OTG).
Datasheet: http://ww1.microchip.com/downloads/en/D ... 01320D.pdf
My initial goal was to use the built in USB port in my microcontroller and interface 3-4+ USB microphones using some USB hub to receive data and do analysis.
However, I stumbled upon the xmos microphone array and I want to know if the xmos microphone array can be connected to this one USB port on my Microcontroller and be compatible, so I can get data from here and program it on MPLABX IDE.
Is this possible?
Datasheet: http://ww1.microchip.com/downloads/en/D ... 01320D.pdf
My initial goal was to use the built in USB port in my microcontroller and interface 3-4+ USB microphones using some USB hub to receive data and do analysis.
However, I stumbled upon the xmos microphone array and I want to know if the xmos microphone array can be connected to this one USB port on my Microcontroller and be compatible, so I can get data from here and program it on MPLABX IDE.
Is this possible?