Hi,
I could connect board to PC and view in USB devices list.
I did recording using Audacity.
I need a program to capture 7-microphones data, How can I do that?
Is there any program for this?
Thanks,
Bhanu
capture 7-microphones data using xCORE ARRAY MICROPHONE board
-
- Member++
- Posts: 21
- Joined: Wed Sep 06, 2017 10:13 pm
-
- XCore Addict
- Posts: 185
- Joined: Tue Mar 26, 2013 12:10 pm
Hi Bhanu,
Audacity supports multichannel recording.
Best,
John
Audacity supports multichannel recording.
Best,
John
-
- Member++
- Posts: 21
- Joined: Wed Sep 06, 2017 10:13 pm
Hi John,
I have tested and recorded the data using Audacity.
But If I want to attach XMOS board to some other board and read the data, What format I receive and How to see details?
If you have any sample program, which gives clarity about format(details like interleaved/non-interleaved, PCM width, sample rate etc) then it will help a lot for me.
Thanks,
Bhanu
I have tested and recorded the data using Audacity.
But If I want to attach XMOS board to some other board and read the data, What format I receive and How to see details?
If you have any sample program, which gives clarity about format(details like interleaved/non-interleaved, PCM width, sample rate etc) then it will help a lot for me.
Thanks,
Bhanu
-
- XCore Addict
- Posts: 185
- Joined: Tue Mar 26, 2013 12:10 pm
This is documented in the USB Audio design guide : https://www.xmos.com/support/boards?product=20258
If you want to do a quick check then you can plug into windows and see the list of supported configurations in the audio control panel. Similar capabilities are available in Linux and OSX.
Best,
John
If you want to do a quick check then you can plug into windows and see the list of supported configurations in the audio control panel. Similar capabilities are available in Linux and OSX.
Best,
John