capture 7-microphones data using xCORE ARRAY MICROPHONE board

New to XMOS and XCore? Get started here.
Post Reply
bhanuprakashbv
Member++
Posts: 21
Joined: Wed Sep 06, 2017 10:13 pm

capture 7-microphones data using xCORE ARRAY MICROPHONE board

Post by bhanuprakashbv »

Hi,

I could connect board to PC and view in USB devices list.
I did recording using Audacity.

I need a program to capture 7-microphones data, How can I do that?
Is there any program for this?

Thanks,
Bhanu


User avatar
johned
XCore Addict
Posts: 185
Joined: Tue Mar 26, 2013 12:10 pm
Contact:

Post by johned »

Hi Bhanu,
Audacity supports multichannel recording.
Best,
John
bhanuprakashbv
Member++
Posts: 21
Joined: Wed Sep 06, 2017 10:13 pm

Post by bhanuprakashbv »

Hi John,

I have tested and recorded the data using Audacity.
But If I want to attach XMOS board to some other board and read the data, What format I receive and How to see details?

If you have any sample program, which gives clarity about format(details like interleaved/non-interleaved, PCM width, sample rate etc) then it will help a lot for me.

Thanks,
Bhanu
User avatar
johned
XCore Addict
Posts: 185
Joined: Tue Mar 26, 2013 12:10 pm
Contact:

Post by johned »

This is documented in the USB Audio design guide : https://www.xmos.com/support/boards?product=20258

If you want to do a quick check then you can plug into windows and see the list of supported configurations in the audio control panel. Similar capabilities are available in Linux and OSX.

Best,
John
Post Reply