I'm starting a new project and I could save a bit of time by testing some stuff on the XTAG-3 hardware.
It looks as if could use one XTAG to load another, though maybe there is a better route. Via DFU?
Is the locked status the key thing? Any ideas?
Can I load my own firmware into XTAG-3?
-
- Newbie
- Posts: 1
- Joined: Thu Feb 22, 2018 3:01 am
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
The xtag3 firmware is closed source. Not clear on why that is but works similar to xtag2. OTP rom boots a ram image supplied by the toolchain to operate.
You could consider to apply your idea onto a xtag2 design:
https://github.com/xcore/proj_xtag2
http://www.xcore.com/viewtopic.php?f=7& ... c62#p28848
You could consider to apply your idea onto a xtag2 design:
https://github.com/xcore/proj_xtag2
http://www.xcore.com/viewtopic.php?f=7& ... c62#p28848