The AN00199_gigabit_ethernet_demo is not producing debug messages when compiled for xCore-200 eXplorer target. Another [ none Ethernet] project displays messages using printf() fine. I can debug the calls to debug_printf() [ also tried using printf] and I can see the code is executing up to the point it calls the write.
Any ideas?
The code itself is running fine and I can ping the board and get a response. It along hits the break point for the debug message.
AN00199_gigabit_ethernet_demo no debug?
-
- Junior Member
- Posts: 7
- Joined: Thu Mar 15, 2018 11:42 am
-
- XCore Expert
- Posts: 578
- Joined: Thu Nov 26, 2015 11:47 pm
Just making sure you are debugging with Target I/O option xSCOPE and not JTAG?
-
- Junior Member
- Posts: 7
- Joined: Thu Mar 15, 2018 11:42 am
Thanks. I build a new project and this worked fine. Will try and look into the debug setting as it would be good to understand why. But i'm making progress with the new project.