Not sure if this has already been posted somewhere, but there's an Australian Elance job popped up.
http://bit.ly/kPqhvo
Elance Job
-
- Respected Member
- Posts: 377
- Joined: Thu Dec 10, 2009 6:07 pm
-
- Active Member
- Posts: 50
- Joined: Sat Feb 13, 2010 12:04 pm
It's mine.
I posted a message here but no one wanted the work. :(
I posted a message here but no one wanted the work. :(
-
- XCore Expert
- Posts: 546
- Joined: Thu Dec 10, 2009 10:41 pm
- Location: St. Leonards-on-Sea, E. Sussex, UK.
Are you using the XC-2? I might be interested, I've got two of them here.
-
- Active Member
- Posts: 50
- Joined: Sat Feb 13, 2010 12:04 pm
I am building a custom board but pretty much all code can be debugged on an XC2. The proof of concept was built using a XC2.
Feel free to PM if you are interested or have other questions.
Feel free to PM if you are interested or have other questions.
-
- XCore Expert
- Posts: 546
- Joined: Thu Dec 10, 2009 10:41 pm
- Location: St. Leonards-on-Sea, E. Sussex, UK.
Matt,
I sent you a PM but didn't get a reply.
Leon
I sent you a PM but didn't get a reply.
Leon
-
- Active Member
- Posts: 50
- Joined: Sat Feb 13, 2010 12:04 pm
Hey Leon,
Thanks for the offer. I have got some Russians on the case. I will keep you posted on how we go :-)
Matt
Thanks for the offer. I have got some Russians on the case. I will keep you posted on how we go :-)
Matt