XMOS programmer needed asap to add few control signal to standard XMOS code

Have a job you want to post? Freelance? New employee needed for your own company? Post it here for all to see!
Post Reply
mehow@mytekdigital.com
Newbie
Posts: 1
Joined: Tue Aug 21, 2018 12:47 am

XMOS programmer needed asap to add few control signal to standard XMOS code

Post by mehow@mytekdigital.com »

XMOS programmer needed asap to add few control signal to standard XMOS code.

This is a posting for temporary work project, possibly followed by more project contract work in the future.

We are looking for programmer to complete already existing code for a pretty standard XMOS USB configuration.

It's a board with the XU216 with the following signal flow: USB Audio (up to DSD128, PCM 192k) >XU216-512 standard uncompiled code with a compiled MQA decoder module> Sabre ES9028 DAC> stereo analog out.

We need to add a bunch of code lines for the following functionality:

a) readout of 3 position input selector switch
b) control of 1 RGB led (4 states possible)
c) control of 6 yellow leds (on /off each)
d) boot up and write registers into ES9028 via i2c
e) detect DSD DOP pattern
f) detect bit resolution 16 or 24

We hope to find someone to work on this for the next few weeks.
Prototype board is available for testing.

Please send inquiries to jobs/atat\mytekdigital.com or call +one six four six 327 1157.

Posted by Michal at Mytek New York


Post Reply