some problem about mic array

Sub forums for various specialist XMOS applications. e.g. USB audio, motor control and robotics.
Post Reply
mark-jack
Member++
Posts: 28
Joined: Fri Oct 13, 2017 4:11 am

some problem about mic array

Post by mark-jack »

When I xrun the example app_usb_aud_mic_array into my xvf3100,Some problems have arisen。Is my xvf3100 development board not supported by this program?Or if it can support this program, then I ask how to modify it。Thank you for your help.
Image


User avatar
johned
XCore Addict
Posts: 185
Joined: Tue Mar 26, 2013 12:10 pm
Contact:

Post by johned »

Hi there,
The firmware for the xvf3100 is available here : https://www.xmos.com/support/boards?product=35855.
Looking at your other post I think you've sorted this but just wanted to confirm.
Best regards,
John
mark-jack
Member++
Posts: 28
Joined: Fri Oct 13, 2017 4:11 am

Post by mark-jack »

johned wrote:Hi there,
The firmware for the xvf3100 is available here : https://www.xmos.com/support/boards?product=35855.
Looking at your other post I think you've sorted this but just wanted to confirm.
Best regards,
John
Thank you for answering my question.I just want to confirm whether my xvf3100 development board can run the examples app_usb_aud_mic_array of USB Audio provided by official website.If it can run how to modify it.
User avatar
johned
XCore Addict
Posts: 185
Joined: Tue Mar 26, 2013 12:10 pm
Contact:

Post by johned »

You can not run the current USB audio firmware on that board, only the Vocal Fusion f/w.

Best,
John
mark-jack
Member++
Posts: 28
Joined: Fri Oct 13, 2017 4:11 am

Post by mark-jack »

ok!Thank you very much!
Post Reply