AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz
-
- Experienced Member
- Posts: 78
- Joined: Thu Mar 08, 2018 2:44 pm
48 is coming from the spdif into the XMOS and 182360( or some similar gibberish) comes out of XMOS
-
- Experienced Member
- Posts: 78
- Joined: Thu Mar 08, 2018 2:44 pm
I used the program that you sent me. I changed the .xn file to xk-audio-216, i changed the ports, and i replaced the codec that you had used with cs4384_5368. But the console prints out when building:
09:58:47 **** Incremental Build of configuration Default for project AN00231_ASRC_SPDIF_TO_DAC ****
xmake CONFIG=Default all
Checking build modules
Using build modules: lib_gpio(1.1.0) lib_i2c(4.0.0) lib_i2s(2.3.0) lib_logging(2.1.1) lib_spdif(2.0.2) lib_src(1.1.1) lib_xassert(3.0.1)
xmake: *** [bin//AN00231_ASRC_SPDIF_TO_DAC.xe] Error 2
09:58:54 Build Finished (took 6s.943ms)
Doesn't exactly say what the bug is...
09:58:47 **** Incremental Build of configuration Default for project AN00231_ASRC_SPDIF_TO_DAC ****
xmake CONFIG=Default all
Checking build modules
Using build modules: lib_gpio(1.1.0) lib_i2c(4.0.0) lib_i2s(2.3.0) lib_logging(2.1.1) lib_spdif(2.0.2) lib_src(1.1.1) lib_xassert(3.0.1)
xmake: *** [bin//AN00231_ASRC_SPDIF_TO_DAC.xe] Error 2
09:58:54 Build Finished (took 6s.943ms)
Doesn't exactly say what the bug is...
-
- Experienced Member
- Posts: 119
- Joined: Mon Sep 15, 2014 1:32 pm
Try to clean project before build or manually delete .build & bin folders.
I use xTIMEcomposer 14.2.4
I use xTIMEcomposer 14.2.4
-
- New User
- Posts: 2
- Joined: Tue Mar 05, 2019 10:16 am
I can't get 192kHz data with AN00231. Can you solve this problem? Or can you refer me to the program from ffomich? My email address is 604797603@qq.com
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
-
- New User
- Posts: 2
- Joined: Tue Mar 05, 2019 10:16 am
I know the app note was not designed to run at 192KHz,but this is what I want to do now.mon2 wrote:https://github.com/xmos/lib_src/issues/17
I tried to modify the program, but it couldn't be implemented, so I hope to get help.
-
- XCore Expert
- Posts: 579
- Joined: Thu Nov 26, 2015 11:47 pm
Good luck. Report on your progress.