JTAG load fail on XE232 board

Sub forums for various specialist XMOS applications. e.g. USB audio, motor control and robotics.
susanyin0501
Active Member
Posts: 37
Joined: Thu Apr 20, 2017 9:00 am

JTAG load fail on XE232 board

Postby susanyin0501 » Thu Jul 05, 2018 10:00 am

Dear all,
I'm trying to bring up xu232 chip board, but i can't load FW to board.

shall i configure FW load address ? how to do it? anything else shall we configure?

Please help us, thanks

.gdbinit: No such file or directory.

connect --adapter-id AjTGt5wG
0x00000000 in ?? ()
[/highlight][/highlight]load
Please refer to http://www.xmos.com/knowledgebase/tools for more details


Xu216 board load information looks like

gdbinit: No such file or directory.

connect --adapter-id AjTGt5wG
0x00040000 in _start ()
load
Loading section .text, size 0x158 lma 0x40000
User avatar
infiniteimprobability
XCore Legend
Posts: 1070
Joined: Thu May 27, 2010 10:08 am

Postby infiniteimprobability » Fri Jul 06, 2018 6:27 am

If you are sure the chip is powered and reset properly, It's possible your signal integrity is not sufficient for 25MHz JTAG.

Try increasing the divider:

Code: Select all

 --jtag-speed <n>         Set the JTAG clock speed :
                           XTAG-1 based adapter 6/(<n>+1)MHz
                           XTAG-2 based adapter 25/(<n>+2)MHz
                           (default value for <n> = 0)
cl-b
Member++
Posts: 27
Joined: Fri Sep 15, 2017 2:58 pm

Postby cl-b » Fri Jul 06, 2018 1:55 pm

We encountered the same problem on our board and we have to power the OTP part even if it is not used to solve it.

Who is online

Users browsing this forum: No registered users and 10 guests