libxud_x200.a (2.5.0) USB enumeration signal error

Sub forums for various specialist XMOS applications. e.g. USB audio, motor control and robotics.
Post Reply
dengzicheng
Junior Member
Posts: 7
Joined: Sat Mar 12, 2016 10:08 am

libxud_x200.a (2.5.0) USB enumeration signal error

Post by dengzicheng »

I am using libxud_x200.a (2.5.0) on USB aduio.the usb_active signal is not normal. I use self-powered mode:SELF_POWERED = 1.
When I disconnect the USB connection, the usb_active signal appears square wave instead of low level.If I use libxud_x200.a (<=2.5.0), it will be low when I unplug the USB.
I don't know what libxud_x200.a (2.5.0) has changed, so that a square wave signal appears.Who knows this?


Post Reply