startKIT board (mechanicals and silkscreen)

All technical discussions and projects around startKIT
Post Reply
User avatar
ahenshaw
Experienced Member
Posts: 96
Joined: Mon Mar 22, 2010 8:55 pm

startKIT board (mechanicals and silkscreen)

Post by ahenshaw »

I thought I'd try my hand at creating a startKIT component for fritzing (http://fritzing.org) and I would benefit from a layout (mechanical and silkscreen) that is either dimensionally annotated or in a standard format that would allow me to extract the dimensions.

Anybody have pointers to that information? The only thing that I have found is the startKIT Hardware Manual that lists the board outer dimensions, but that is all.


teachop
Active Member
Posts: 47
Joined: Wed Feb 05, 2014 1:25 am

Post by teachop »

Cast my vote yes - a Fritzing part would be nice to have!
User avatar
ahenshaw
Experienced Member
Posts: 96
Joined: Mon Mar 22, 2010 8:55 pm

Post by ahenshaw »

Good to hear. I'm making progress. My (incomplete) breadboard view can be seen at http://apps.henshaw.us/fritzing/startKit.svg
Post Reply