Electrical specs for startkit gpio pins? Topic is solved

All technical discussions and projects around startKIT
Post Reply
hessa59
Active Member
Posts: 37
Joined: Sat Mar 18, 2017 7:19 pm

Electrical specs for startkit gpio pins?

Post by hessa59 »

Is there a spot in the documentation that describes the maximum sink and source current for the gpio on the startkit? I have not been able to find it.

I have seen reference to 8mA pins and 4mA pins but I don't know which are which or what the max sink or source current is for a specific port or the whole chip.

I have also seen conflicting versions of which data sheet I am supposed to be looking at for the start kit processor.

However all the data sheets I have looked at refer to the range of V out low, V out high, V in low, V in high but nothing about current limits.

Can anyone definitively state which data sheet I should be looking at for the processor on the startkit?

Any help would be greatly appreciated!

This looks like a good concept and product but I am really having trouble navigating the documentation!


View Solution
hessa59
Active Member
Posts: 37
Joined: Sat Mar 18, 2017 7:19 pm

Post by hessa59 »

Thanks mon2

By the way I took your advice and upgraded my java runtime and my xtimecomposer works better :)
Post Reply