Need mechanical Dimension of Xmos Startkit

If you have a simple question and just want an answer.
Post Reply
darshan2210
Member++
Posts: 22
Joined: Tue Jan 24, 2017 10:47 am

Need mechanical Dimension of Xmos Startkit

Post by darshan2210 »

Hello,
I are using Xmos startkit in my Prototype . We want to mount one other opto Isolation card with Xmos start kit . So for Proper pcb designing and Mounting we need Xmos startkit Mechanical dimensions and drawing. I have already searched but didn't got..
Please send me link. If any one have.


User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Post by mon2 »

2D dimensions are posted inside the hardware manual

https://www.xmos.com/support/boards?pro ... nent=17227

You could measure the height. If you create a 3D diagram consider to share for other readers. Will check if we did the same upon reaching the office.

How will the optical isolation work?
darshan2210
Member++
Posts: 22
Joined: Tue Jan 24, 2017 10:47 am

Post by darshan2210 »

We need complete dimension because we need to mount Startkit on mounting with screw and also fix another pcb on startkit with bug stripe.
We are driving motors from startkit. Optical isolation is one type of electrical isolation with opto coupler ICs .
darshan2210
Member++
Posts: 22
Joined: Tue Jan 24, 2017 10:47 am

Post by darshan2210 »

Hello, Please any one help me. So i can solve my problem .
Is that no any answer for my question?
Post Reply