Hello,
I are using Xmos startkit in my Prototype . We want to mount one other opto Isolation card with Xmos start kit . So for Proper pcb designing and Mounting we need Xmos startkit Mechanical dimensions and drawing. I have already searched but didn't got..
Please send me link. If any one have.
Need mechanical Dimension of Xmos Startkit
-
- Member++
- Posts: 22
- Joined: Tue Jan 24, 2017 10:47 am
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
2D dimensions are posted inside the hardware manual
https://www.xmos.com/support/boards?pro ... nent=17227
You could measure the height. If you create a 3D diagram consider to share for other readers. Will check if we did the same upon reaching the office.
How will the optical isolation work?
https://www.xmos.com/support/boards?pro ... nent=17227
You could measure the height. If you create a 3D diagram consider to share for other readers. Will check if we did the same upon reaching the office.
How will the optical isolation work?
-
- Member++
- Posts: 22
- Joined: Tue Jan 24, 2017 10:47 am
We need complete dimension because we need to mount Startkit on mounting with screw and also fix another pcb on startkit with bug stripe.
We are driving motors from startkit. Optical isolation is one type of electrical isolation with opto coupler ICs .
We are driving motors from startkit. Optical isolation is one type of electrical isolation with opto coupler ICs .
-
- Member++
- Posts: 22
- Joined: Tue Jan 24, 2017 10:47 am
Hello, Please any one help me. So i can solve my problem .
Is that no any answer for my question?
Is that no any answer for my question?