Channel limit for AVB Listener

If you have a simple question and just want an answer.
Post Reply
User avatar
RichardFoss
New User
Posts: 3
Joined: Thu May 28, 2015 11:35 am

Channel limit for AVB Listener

Post by RichardFoss »

Is it correct that 32 is the maximum number of channels that can be received by an AVB Listener as implemented on an xCORE-200? This could be received as a single stream of 32 channels, 2 streams of 16 channels, or 4 streams of 8 channels?


User avatar
johned
XCore Addict
Posts: 185
Joined: Tue Mar 26, 2013 12:10 pm
Contact:

Post by johned »

Hi Richard,
Yes, the default code supports a maximum 32 channels. If you download the code from our website you would certainly be able to change it to support higher channel counts.
One thing to be aware of is the number of 1 bit ports, if you are thinking about using i2s. You will certainly need to use TDM8 to support higher channel counts.
Best,
John
User avatar
RichardFoss
New User
Posts: 3
Joined: Thu May 28, 2015 11:35 am

Post by RichardFoss »

Thanks for the information John! I currently mix the incoming channels and only output 2 channels.

That's great that it's possible to receive higher channel counts - I will see if I can make that happen in my current project.

Regards, Richard.
Post Reply