USB Not Detected - app_usb_aud_mic_array
-
- Member
- Posts: 13
- Joined: Fri Sep 29, 2017 8:45 am
Currently trying to ship it back to supplier before ordering a replacement.
-
- XCore Expert
- Posts: 968
- Joined: Thu Dec 10, 2009 9:20 pm
- Location: Bristol, UK
Firmware version 6.19+ must be used.
-
- Member
- Posts: 12
- Joined: Thu Oct 12, 2017 8:04 pm
Download "sw_usb_audio-[sw]_6.15.2rc1.zip" from the below link
http://www.xmos.com/support/software/uac2
And replace module_xud with the below one
https://drive.google.com/drive/folders/ ... sp=sharing
Then generate "app_usb_aud_mic_array_2i8o2.xe" firmware file with the above combination using xtimecomposer
Now you must be able to find XMOS USB 2.0 audio device on your windows PC.
Note: Makesure you have installed windows driver from the below link (TUSBAudio control panel)
http://www.xmos.com/support/usb-audio-driver-support
As well you can find xe files from here
https://drive.google.com/drive/u/0/fold ... TdLbGdxbmM
http://www.xmos.com/support/software/uac2
And replace module_xud with the below one
https://drive.google.com/drive/folders/ ... sp=sharing
Then generate "app_usb_aud_mic_array_2i8o2.xe" firmware file with the above combination using xtimecomposer
Now you must be able to find XMOS USB 2.0 audio device on your windows PC.
Note: Makesure you have installed windows driver from the below link (TUSBAudio control panel)
http://www.xmos.com/support/usb-audio-driver-support
As well you can find xe files from here
https://drive.google.com/drive/u/0/fold ... TdLbGdxbmM
-
- Newbie
- Posts: 1
- Joined: Sat Oct 28, 2017 5:05 am
please help me, i replace module_xud by file following the link https://drive.google.com/drive/folders/ ... sp=sharing ,then i import the project into xTIMEcomposer , i build it with error , it can't build formally , how to fix them?
-
- Member
- Posts: 12
- Joined: Thu Oct 12, 2017 8:04 pm
Please use all these and build firmware