KiCad schematic and 192 output
-
- Experienced Member
- Posts: 78
- Joined: Thu Mar 08, 2018 2:44 pm
KiCad schematic and 192 output
Does anyone have KiCad schematics of the xCore-200 Audio board? I went through the Forum, but did not really find a topic on this. AAaand I am also looking into getting a 192 SR out of the default usb audio program, but I did not find this in the settings.
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
Hi. Maybe you can convert the Altium format to Kicad?
https://github.com/thesourcerer8/altium2kicad
http://www2.futureware.at/KiCad/
https://github.com/thesourcerer8/altium2kicad
http://www2.futureware.at/KiCad/
-
- Experienced Member
- Posts: 78
- Joined: Thu Mar 08, 2018 2:44 pm
It does not seem to work, but its a start. Honestly I did not know of Altium until now. It should be as simple as -upload zipfile -get new zip file- unpack- run, but it isn't producing a .pro file.
-
- Experienced Member
- Posts: 78
- Joined: Thu Mar 08, 2018 2:44 pm
The online app did not work, but the schematic conversion was successful in linux following the instructions. Still unable to get the footprints though.