some problem about xvf3100

Voice related projects and technical discussions
mark-jack
Member
Posts: 13
Joined: Fri Oct 13, 2017 4:11 am

some problem about xvf3100

Postby mark-jack » Fri Nov 10, 2017 9:35 am

Why my microphone array development board (xvf3100) driver will not fit?
Image
User avatar
infiniteimprobability
XCore Expert
Posts: 876
Joined: Thu May 27, 2010 10:08 am
Contact:

Postby infiniteimprobability » Mon Nov 13, 2017 4:07 pm

From the docs:

DFU via USB
~~~~~~~~~~~

|vocal_fusion| uses DFU implementation from the XMOS USB Audio reference design. The `FORCE_UAC1_DFU` define is used to enable DFU in build configurations that use USB audio class 1.0 rather than class 2.0. The USB Audio reference design has normally DFU disabled in audio class 1.0.

Detailed information on using DFU via *sc_usb_audio* can be found in the USB Audio Design Guide [#]_ and DFU loader for XMOS USB AUDIO devices [#]_ which are linked below.

.. [#] https://www.xmos.com/download/private/U ... 6.6.0rc5.a).pdf
.. [#] https://www.xmos.com/download/private/D ... 1.1%29.pdf


In short, you need a driver for that as windows does not include a DFU driver. You can try the thesycon driver..
https://www.xmos.com/support/usb-audio-driver-support
mark-jack
Member
Posts: 13
Joined: Fri Oct 13, 2017 4:11 am

Postby mark-jack » Thu Nov 16, 2017 10:00 am

Ok, thank you very much!

Return to “Voice”

Who is online

Users browsing this forum: No registered users and 2 guests