Are there any boards with external SRAM/SDRAM available ?
-
- Respected Member
- Posts: 259
- Joined: Thu Sep 16, 2010 9:15 am
I want to do a... logic analyzer... a bench logic analyzer that does not depend on a PC (Like the one I have now Intronix, although good requires a PC). This is only the front-end. If it works as I want then I'll go for this design if not I'll have to change to an AVR32.... let's see :). This will rock !
-
- XCore Addict
- Posts: 234
- Joined: Thu Dec 10, 2009 11:11 pm
- Location: Newcastle, UK
Ale, they look a nice set of boards.
A standalone logic analyser sounds like a great project. Keep us posted on your progress !
A standalone logic analyser sounds like a great project. Keep us posted on your progress !
-
- Respected Member
- Posts: 259
- Joined: Thu Sep 16, 2010 9:15 am
I have the display working. A 480x272 TFT, I'm only using 6 bits for color... No need for 24 bit just right now.
You do not have the required permissions to view the files attached to this post.
-
- XCore Expert
- Posts: 956
- Joined: Fri Dec 11, 2009 3:53 am
- Location: Sweden, Eskilstuna
Is the green board one of the pieces in XSMB-L1 ??
Probably not the most confused programmer anymore on the XCORE forum.
-
- Respected Member
- Posts: 259
- Joined: Thu Sep 16, 2010 9:15 am
The green board is the LCD breakout from Rayslogic. The XS1 MBs should come in 2 weeks :)
-
- Respected Member
- Posts: 259
- Joined: Thu Sep 16, 2010 9:15 am
The boards arrived !... now I have to cut them :) and populate them
You do not have the required permissions to view the files attached to this post.
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
Nice, hope you have a steady hand to solder them up;-)
-
- Respected Member
- Posts: 259
- Joined: Thu Sep 16, 2010 9:15 am
Cutting the boards is proving challenging enough due to the short distance between them...
-
- Respected Member
- Posts: 363
- Joined: Thu Dec 10, 2009 10:17 pm
Looking nice there, good luck on getting the boards to work quickly.
-
- Respected Member
- Posts: 259
- Joined: Thu Sep 16, 2010 9:15 am
Small update,
the 1 V switching regulator works well. Now for the reset circuit. (I do not find the 100 nF 0603 that I have... so I have to keep searching...)
the 1 V switching regulator works well. Now for the reset circuit. (I do not find the 100 nF 0603 that I have... so I have to keep searching...)