Connect bits streams at 13Mhz to XCORE

Technical discussions around xCORE processors (e.g. xcore-200 & xcore.ai).
Post Reply
michcfr
Junior Member
Posts: 4
Joined: Tue Jan 24, 2017 6:08 pm

Connect bits streams at 13Mhz to XCORE

Post by michcfr »

Hello,
I have a board which have 8 x bit streams. Each bit stream has its own associated independent bit clock. So I have: 8 x 2pins (one for the bit stream, one for its associated bit clock). Each bit clock is at 13Mhz.

I would like to connect these streams to a XCORE processor for further processing. Is it feasible?
If yes, how to organize the hardware model: pin/core, timers and communication fabric?

Thx,
Michel


Choughtosh
Member++
Posts: 22
Joined: Thu Apr 10, 2014 9:39 am

Post by Choughtosh »

Michel,

Have a look at these two pages, they should cover what you need:

https://www.xmos.com/published/xc-clock ... and-output

https://www.xmos.com/download/private/I ... 2738B).pdf

Thanks,

Rob
michcfr
Junior Member
Posts: 4
Joined: Tue Jan 24, 2017 6:08 pm

Post by michcfr »

Hi

Thank you for your reply and help.
What is the maximum GPIO speed on the XS1 and for on the X200. Thx

Regards
Michel
Choughtosh
Member++
Posts: 22
Joined: Thu Apr 10, 2014 9:39 am

Post by Choughtosh »

Hi,

You can find details on the IO speed in the relevant datasheets.

thanks,

Rob
michcfr
Junior Member
Posts: 4
Joined: Tue Jan 24, 2017 6:08 pm

Post by michcfr »

Hello,
Thank you.
Up to how many bit streams of 13Mhz each a X200's xcore logical core can support? Thx

Regards
Michel
Post Reply