Hello,
I have a board which have 8 x bit streams. Each bit stream has its own associated independent bit clock. So I have: 8 x 2pins (one for the bit stream, one for its associated bit clock). Each bit clock is at 13Mhz.
I would like to connect these streams to a XCORE processor for further processing. Is it feasible?
If yes, how to organize the hardware model: pin/core, timers and communication fabric?
Thx,
Michel
Connect bits streams at 13Mhz to XCORE
-
- Junior Member
- Posts: 4
- Joined: Tue Jan 24, 2017 6:08 pm
-
- Member++
- Posts: 22
- Joined: Thu Apr 10, 2014 9:39 am
Michel,
Have a look at these two pages, they should cover what you need:
https://www.xmos.com/published/xc-clock ... and-output
https://www.xmos.com/download/private/I ... 2738B).pdf
Thanks,
Rob
Have a look at these two pages, they should cover what you need:
https://www.xmos.com/published/xc-clock ... and-output
https://www.xmos.com/download/private/I ... 2738B).pdf
Thanks,
Rob
-
- Junior Member
- Posts: 4
- Joined: Tue Jan 24, 2017 6:08 pm
Hi
Thank you for your reply and help.
What is the maximum GPIO speed on the XS1 and for on the X200. Thx
Regards
Michel
Thank you for your reply and help.
What is the maximum GPIO speed on the XS1 and for on the X200. Thx
Regards
Michel
-
- Member++
- Posts: 22
- Joined: Thu Apr 10, 2014 9:39 am
Hi,
You can find details on the IO speed in the relevant datasheets.
thanks,
Rob
You can find details on the IO speed in the relevant datasheets.
thanks,
Rob
-
- Junior Member
- Posts: 4
- Joined: Tue Jan 24, 2017 6:08 pm
Hello,
Thank you.
Up to how many bit streams of 13Mhz each a X200's xcore logical core can support? Thx
Regards
Michel
Thank you.
Up to how many bit streams of 13Mhz each a X200's xcore logical core can support? Thx
Regards
Michel