I had a previous project put on hold and we are now looking at using the XU208-256-QF48 for another project. Looking at this part and its portmap part has raised a few questions.
1) Some ports have incomplete pin mappings, for example P4C has P4C2 and P4C3 unconnected. I am wondering how this affects things if I want to use P4C0 and P4C1? Can I use them as effectively a 2 bit port?
2) If the internal flash part is used, dose that free up the QSPI pins?
3) This is more a general xmos question, but we wish to have multiple I2S data lines connected and they will all share common clocks. Is it fine to use a 4bit port for 4 I2S TX lines, or must they each be 1 bit ports?
Thanks
XU208-256-QF48 Incomplete Ports
-
- Member
- Posts: 9
- Joined: Thu May 05, 2016 4:47 am
-
- Member++
- Posts: 16
- Joined: Thu Apr 10, 2014 4:42 pm
1,你可以把4C当做4bit port 使用,4C0和41是有物理的输入输出,4C2和4C3没有物理I/O脚。
2,XU208-256-QF48里面没有内置的QSPI flash
3, 可以使用4bit port来做I2S,您可以使用相应的例程去开发。
谢谢
木瓜电子
www.pawpaw.hk
2,XU208-256-QF48里面没有内置的QSPI flash
3, 可以使用4bit port来做I2S,您可以使用相应的例程去开发。
谢谢
木瓜电子
www.pawpaw.hk