Hello,
I would like to know the recomended pad size forXU210-256-TQ128
but i can't find the information such as XS1 series' detasheet has like this info.
Could anyone share this information about recomended pad size?
Best regards,
Kanae
Recommended pad size
-
- Junior Member
- Posts: 5
- Joined: Fri Nov 25, 2016 1:26 am
-
- XCore Expert
- Posts: 754
- Joined: Thu Dec 10, 2009 6:56 pm
The package is the same as TQ128 packages with XS1
-
- Active Member
- Posts: 48
- Joined: Mon Oct 19, 2015 2:12 pm
Hi Kanae,
you could take a look at some of our development boards for an example of a TQ128 footprint, e.g. see the link at the bottom of here: https://www.xmos.com/support/boards?product=20258
Hope this helps,
Matthew.
XMOS
you could take a look at some of our development boards for an example of a TQ128 footprint, e.g. see the link at the bottom of here: https://www.xmos.com/support/boards?product=20258
Hope this helps,
Matthew.
XMOS
-
- Junior Member
- Posts: 5
- Joined: Fri Nov 25, 2016 1:26 am
Hi, Thanks all of you!
I will refer to your advice.
Best regards,
Kanae
I will refer to your advice.
Best regards,
Kanae