XU208-128-TQ64 : Problem SPI Flash
Posted: Thu Dec 14, 2017 5:00 pm
Hi everyone,
I encountered a problem when I wanted to program my s/w into the flash.
Command Prompt indicated that :
I did verify and everything seems good, I don't know where the problem could be...
Here is my xn file and makefile.
If anyone has an idea where the problem is, may be the flash itself ?
The SPI Flash I use is : AT25SF041-SSHD-T
I encountered a problem when I wanted to program my s/w into the flash.
Command Prompt indicated that :
Code: Select all
C:\Users\xxx>xflash usb_aud_XU208.xe
Error on tile[0]: failed to connect to flash device. Please verify that SPI type is supported and that the correct SPI ports are defined within your xn file.
Here is my xn file and makefile.
If anyone has an idea where the problem is, may be the flash itself ?
The SPI Flash I use is : AT25SF041-SSHD-T