DOP not working correctly with Mixer and Volume turned off!?

Technical discussions around xCORE processors (e.g. General Purpose (L/G), xCORE-USB, xCORE-Analog, xCORE-XA).
SonnyDK
Member
Posts: 11
Joined: Wed Apr 13, 2016 8:30 am

DOP not working correctly with Mixer and Volume turned off!?

Postby SonnyDK » Tue Sep 18, 2018 9:30 am

Hi, we have the issue that if we turn mixer and volume control off the signal get corrupted... There should be no processing on the DOP container, none the less the data stream is on DSDL and DSDR is not continuesly but like the DOP marker gets corrupted....

Any one having this issue?

Processor is XUF208 + latest USB Audio class software.

Normal PCM works BTW.

BR

Sonny
SonnyDK
Member
Posts: 11
Joined: Wed Apr 13, 2016 8:30 am

Postby SonnyDK » Tue Sep 18, 2018 11:05 am

The attached shots are with DSD direct.

scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
Attachments
scope_2.png
(27.75 KiB) Not downloaded yet
scope_2.png
(27.75 KiB) Not downloaded yet
scope_1.png
(28.79 KiB) Not downloaded yet
scope_1.png
(28.79 KiB) Not downloaded yet
SonnyDK
Member
Posts: 11
Joined: Wed Apr 13, 2016 8:30 am

Postby SonnyDK » Tue Sep 18, 2018 11:48 am

I have investigated more.

The bit rate of the data matches the samplerate. So that is okay.
The Mixer and Volume control is ok and switched of as the DOP matches the DSD data stream.
DSD clock bit is also ok.

Only every 8. 32 bit samples get you. 11.4uSec out of 79.8uSec.

Something is missing but i cannot figure out what the issue is. It is the Stock code and the Audio.xc is only modified with "__XS2A__" defination.
User avatar
mon2
XCore Legend
Posts: 1282
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Postby mon2 » Tue Sep 18, 2018 12:30 pm

Hi. Not an audio developer but review this thread and especially the last post from shaw and XMOS technical support:

viewtopic.php?f=8&t=6767&hilit=DOP&start=10

Code: Select all

http://www.xcore.com/viewtopic.php?f=8&t=6767&hilit=DOP&start=10

Who is online

Users browsing this forum: No registered users and 29 guests