DOP not working correctly with Mixer and Volume turned off!?

Technical discussions around xCORE processors (e.g. xcore-200 & xcore.ai).
Post Reply
SonnyDK
Member
Posts: 13
Joined: Wed Apr 13, 2016 8:30 am

DOP not working correctly with Mixer and Volume turned off!?

Post by SonnyDK »

Hi, we have the issue that if we turn mixer and volume control off the signal get corrupted... There should be no processing on the DOP container, none the less the data stream is on DSDL and DSDR is not continuesly but like the DOP marker gets corrupted....

Any one having this issue?

Processor is XUF208 + latest USB Audio class software.

Normal PCM works BTW.

BR

Sonny


SonnyDK
Member
Posts: 13
Joined: Wed Apr 13, 2016 8:30 am

Post by SonnyDK »

The attached shots are with DSD direct.
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
scope_0.png
(34.24 KiB) Not downloaded yet
Attachments
scope_2.png
(27.75 KiB) Not downloaded yet
scope_2.png
(27.75 KiB) Not downloaded yet
scope_1.png
(28.79 KiB) Not downloaded yet
scope_1.png
(28.79 KiB) Not downloaded yet
SonnyDK
Member
Posts: 13
Joined: Wed Apr 13, 2016 8:30 am

Post by SonnyDK »

I have investigated more.

The bit rate of the data matches the samplerate. So that is okay.
The Mixer and Volume control is ok and switched of as the DOP matches the DSD data stream.
DSD clock bit is also ok.

Only every 8. 32 bit samples get you. 11.4uSec out of 79.8uSec.

Something is missing but i cannot figure out what the issue is. It is the Stock code and the Audio.xc is only modified with "__XS2A__" defination.
User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Post by mon2 »

Hi. Not an audio developer but review this thread and especially the last post from shaw and XMOS technical support:

http://www.xcore.com/viewtopic.php?f=8& ... P&start=10

Code: Select all

http://www.xcore.com/viewtopic.php?f=8&t=6767&hilit=DOP&start=10
Post Reply