Hi, we have the issue that if we turn mixer and volume control off the signal get corrupted... There should be no processing on the DOP container, none the less the data stream is on DSDL and DSDR is not continuesly but like the DOP marker gets corrupted....
Any one having this issue?
Processor is XUF208 + latest USB Audio class software.
Normal PCM works BTW.
BR
Sonny
DOP not working correctly with Mixer and Volume turned off!?
-
- Member
- Posts: 13
- Joined: Wed Apr 13, 2016 8:30 am
-
- Member
- Posts: 13
- Joined: Wed Apr 13, 2016 8:30 am
The attached shots are with DSD direct.
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 13
- Joined: Wed Apr 13, 2016 8:30 am
I have investigated more.
The bit rate of the data matches the samplerate. So that is okay.
The Mixer and Volume control is ok and switched of as the DOP matches the DSD data stream.
DSD clock bit is also ok.
Only every 8. 32 bit samples get you. 11.4uSec out of 79.8uSec.
Something is missing but i cannot figure out what the issue is. It is the Stock code and the Audio.xc is only modified with "__XS2A__" defination.
The bit rate of the data matches the samplerate. So that is okay.
The Mixer and Volume control is ok and switched of as the DOP matches the DSD data stream.
DSD clock bit is also ok.
Only every 8. 32 bit samples get you. 11.4uSec out of 79.8uSec.
Something is missing but i cannot figure out what the issue is. It is the Stock code and the Audio.xc is only modified with "__XS2A__" defination.
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
Hi. Not an audio developer but review this thread and especially the last post from shaw and XMOS technical support:
http://www.xcore.com/viewtopic.php?f=8& ... P&start=10
http://www.xcore.com/viewtopic.php?f=8& ... P&start=10
Code: Select all
http://www.xcore.com/viewtopic.php?f=8&t=6767&hilit=DOP&start=10