Mic Array Board - Expansion Port Pins

Technical discussions related to any XMOS development kit or reference design. Eg XK-1A, sliceKIT, etc.
Post Reply
MikePelton
Junior Member
Posts: 4
Joined: Wed Feb 22, 2017 4:03 pm

Mic Array Board - Expansion Port Pins

Post by MikePelton »

Probably a dumb question but, for the XP-USB-VSM-2000 XCore Voice Smart Mic board, does anyone know how the pins on the "Expansion" GPIO 16-pin expansion header J5 are physically numbered? If I wanted to find (for example) Pin 7, how would I know which it is? Not seeing any clue in the doc or on the board itself.

Thanks in advance
Mike


User avatar
infiniteimprobability
XCore Legend
Posts: 1126
Joined: Thu May 27, 2010 10:08 am
Contact:

Post by infiniteimprobability »

Yes - not 100% clear I agree. The clump of 4 ground pins sit closest to the Xmos device itself. That is pin 2 is closest to the xmos device and pin 15 is furthest away.
To be 100% sure, I normally do a quick continuity test with the board powered off..
MikePelton
Junior Member
Posts: 4
Joined: Wed Feb 22, 2017 4:03 pm

Post by MikePelton »

Many thanks!
Post Reply