Re: XK-AUDIO-216-MC free GPIO pins?
Posted: Tue Jan 30, 2018 1:53 pm
Other options:
You can use SPDIF/ADAT tx to get 2 x 1b ports - the signals are brought out to PTHs marked C_TX and O_TX. You'll get a copy of your signal on the TOSLINK/COAX pins but that's not an issue..
I have also frankenstiened boards in the past by soldering wires onto the LEDs. You can get whole 8b port (or 2 x 4b) this way..
You can use SPDIF/ADAT tx to get 2 x 1b ports - the signals are brought out to PTHs marked C_TX and O_TX. You'll get a copy of your signal on the TOSLINK/COAX pins but that's not an issue..
I have also frankenstiened boards in the past by soldering wires onto the LEDs. You can get whole 8b port (or 2 x 4b) this way..